4~20mA Wireless IoT Module

<
>

4~20mA Wireless IoT Module

Model no:IoT103

The 4~20mA Wireless IoT Module is a wireless Internet of things gateway, designed for converting 4~20mA analog transducer signal to Wireless communcation over SMS/GPRS/3G/4G/NB-IoT Cellular Network, and connect to the IoT Cloud Platform. Suitable for pressure transducers, wind speed transducers, oil level transducers,liquid level transducers,etc.

Consult QQ

The 4~20mA Wireless IoT Module is a wireless Internet of things gateway, designed for converting 4~20mA analog transducer signal to Wireless communcation over SMS/GPRS/3G/4G/NB-IoT Cellular Network, and connect to the IoT Cloud Platform. 

The 4~20mA Wireless IoT Module suitable for pressure transducers, wind speed transducers, oil level transducers,liquid level transducers,etc.

The 4~20mA Wireless IoT Module supports Modbus TCP Protocol and MQTT Protocol, compatiable KPIIOT cloud platform and other cloud platform or SCADA or OPC Server.

wireless sensor

TagsWireless IoT ModuleWireless IOT Gatewaytransducers IoT gatewaytransducers Iot moduleWireless pressure transducerswireless temperature sensorsensor to cloud

1.     Can be used as a complete product or as a secondary development module;

2.     Two working modes are available:

       Normal mode: Real-time data transmission,Users can inquiry the real-time status;

       Low power consumption mode: Ultra low power consumption(230uA);

3.     Multiple communication methods:GSM,GPRS,3G,4G,NB-IoT,LoRa,Ethernet,etc;

4.     Coverting 4~20mA analog signal to cloud platform over cellular network;

5.     Support configure parameters and query real-time data via SMS,software,cloud platform;

6.     Up to 10 SMS Alert and dial numbers, can program to receive specified alarm message;

7.     Support two different server centers,can set IP address or domain name ;

8.     Support Modbus RTU over TCP and MQTT protocol;

9.    Wide range power supply 7~24VDC with phase-reversal protection;

10.  Using Nano sim card,support PIN code function;

11.  Provide PCBA or waterproof enclosure,can be used outside.


Item

Reference Scope

DC Power supply

7-24VDC

Power consumption

Low power consumption mode Standby:<230uA;

Normal mode:10mA~30mA,Max:230-360mA.

Communication

Optional:GSM/GPRS/3G/4G/NB-IoT/Ethernet/LoRa

Protocols

Modbus RTU Over TCP, MQTT

SIM interface

Nano

Cellular Antenna

SMA Antenna interface, 50 Ohm

Serial Interfaces

Micro USB Port;

Digital output

OC output,1A 30V DC

Digital Input

NO or NC

Analog Inputs

0-5V or 4-20mA

Temp.&Hum Inputs

AM2301:Temperature range: -40°C to +80°C, Humidity Range: 0~100%RH

Temperature Input

DS18B20:Temperature range: -55°C to +125°C,±3% RH

Temperature range

-10-+60 °C

Humidity range

Relative humidity 95% (condensation free)


4~20mA Wireless IoT Module Data Sheet



Wireless IoT Module User Manual 




4~20mA Wireless IoT Module PC Configuration Tool




4~20mA Wireless IoT Module Photos




This module approved by the belowmetioned certificates and references standards:

EMI Standard :

EN55032:2015

EN 61000-3-2:2014

EN 61000-3-3:2013

EMS Standard:

EN 55024:2010+A1:2015

EN 1000-4-2:2009

EN61000-4-3:2006+A1:2008+A2:2010

EN61000-4-4:2012;

EN 61000-4-5:2014;

EN 61000-4-6:2014;

EN 61000-4-8:2010

EN 61000-4-11:2004

CE-LVD Standards:

IEC 60950-1:2005+A1:2009+A2:2013

EN 60950-1:2006+A2:2013

EN 62311:2008

EMC:

ETSI EN 301 489-1 V2.2.0(2017-03)

ETSI EN 301 489-17 V3.2.0(2017-03)

ETSI EN 300 328 V2.1.1 (2016-11)

Wireless IoT Module X1

GSM/3G/4G Antenna X1

User Manual X1

PC ConfiguratorX1


Wireless IoT Module Wireless IoT Sensor