Wireless Door Contact

<
>

Wireless Door Contact

Model no:DM-100C

The DM-100C is a low-cost and low power consumption premise protaction unit. It is special for monitoring the door or windows, once the door or windows opened, will activate the DM-100C and send the signal to the alarm panel to alarm. The DM-100C adopt power-saving technology, using #7 battery. when the battery power capacity less than 40% percent, the Low voltage LED indicator will flash to alert.

Consult QQ
The DM-100C is a learning code and low-cost and low power consumption premise protaction unit. It is special for monitoring the door or windows, once the door or windows opened, will activate the DM-100C and send the signal to the alarm panel to alarm. 
The DM-100C adopt power-saving technology, using #7 battery. when the battery power capacity less than 40% percent, the Low voltage LED indicator will flash to alert the owner.

Moreover, the DM-100C can be used as a wired detector RF transmitter.
Working Voltage: 3V(2 AAAbattery);

Battery Life: About 1 year (counted at 3 times each day); 
Wireless Frequency : 433 MHZ
Transmission Range: 100m

Working Current (mA): less than 15mA

Static Current(uA): less than 5uA

Installation Method: Wall-mounted by Screw.

Size: Transmitter part: (HxWxD) 100x30x26mm.  Magnet part: 60X23*10mm

Applications: For indoor use. door or windows, etc.
EMI Standard :
EN55032:2015;
EN 61000-3-2:2014;
EN 61000-3-3:2013;
EMS Standard:
EN 55024:2010+A1:2015;
EN 1000-4-2:2009;
EN61000-4-3:2006+A1:2008+A2:2010;
EN61000-4-4:2012;
EN 61000-4-5:2014;
EN 61000-4-6:2014;
EN 61000-4-8:2010;
EN 61000-4-11:2004;
CE-LVD Standards:
IEC 60950-1:2005+A1:2009+A2:2013;
EN 60950-1:2006+A2:2013;
EN 62311:2008;
EMC:
ETSI EN 301 489-1 V2.2.0(2017-03);
ETSI EN 301 489-17 V3.2.0(2017-03);
ETSI EN 300 328 V2.1.1 (2016-11).