Wireless PIR Motion Detector


Wireless PIR Motion Detector

Model no:PIR-100B

The wireless PIR Motion Sensor PIR-100B is an INPUT DEVICE, the motion sensor works on the principle of sensing infrared energy (heat) emitting from an intruder"s body moving through a protected area.It is with internal Antenna and MCU inside.

Consult QQ
The wireless PIR Motion detector is an INPUT DEVICE, The PIR-100B PIR motion detector is designed to provide detection of criminal intrusion through door frames and window frames into a protected area by sensing infrared energy (heat) emitting from an intruder’s body moving through a protected area. The MOTION SENSOR is commonly referred to as a PIR, which stands for passive Infrared. Upon detection of intrusion, the PIR-100B automatically generates an alarm signal to control panel. The sensor also provides a tamper contact output. The unit is RF and EMI Immunity to interferences produced by radio device. The unit is can be wall-mounted by means of a bracket.
Internal Wireless Antenna, long distance transmission;

Learning code, easy to assign to the alarm panels;

Tamper Switch for protecting the to avoid opened;

Newly-developed dual element passive infrared sensor unit;

Wireless transmitting digital signal to control panel;

Intelligent MCU inside, eliminate false alarm;

Low power alert by buzzer sounds;

Microcontroller temperature analysis and Automatic temperature compensation for best summertime detection;

Tightly-mated bug guard to protect the sensor optics from insects, spiders and dust;

Selectable detection sensitivity (standard/high) for different environmental requirements;

SMT adopted, RF and EMI Immunity;

Low power consumption, long battery life;

Adjustable detection time span(4minutes or 8 minutes).

Operating Voltage

1.5V AA Battery

Detection Range

Vertical angle 60degree, Horizontal angle 110 degree, 12m

Standby Current

less than 12uA

Alarm Current

less than 22mA

RF Immunity

> 20 V/m 10 – 1000 MHz


> 3300V/W


<200mV, (mVp-p)(25°C)

Transmitting Freq.


Transmitting Distance

minimum 100m( in the open area)

Temperature Range

-10°C to +50°C

Relative Humidity

90% (25  )

Installation Mode

Wall mounted by bracket

Installation Height



High-impact ABS


107x59x45mm (HxWxD)


For indoor use. Corridor, Office, Room, Museum, Library, Finance Room, Warehouse, etc.

EMI Standard :
EN 61000-3-2:2014;
EN 61000-3-3:2013;
EMS Standard:
EN 55024:2010+A1:2015;
EN 1000-4-2:2009;
EN 61000-4-5:2014;
EN 61000-4-6:2014;
EN 61000-4-8:2010;
EN 61000-4-11:2004;
CE-LVD Standards:
IEC 60950-1:2005+A1:2009+A2:2013;
EN 60950-1:2006+A2:2013;
EN 62311:2008;
ETSI EN 301 489-1 V2.2.0(2017-03);
ETSI EN 301 489-17 V3.2.0(2017-03);
ETSI EN 300 328 V2.1.1 (2016-11).