Wired Garage Door Magnetic Contact

<
>

Wired Garage Door Magnetic Contact

Model no:SDM-01

The Wired Garage Door Magnetic Contact is special for metallic material doors.e.g.: Shutter doors, Garage Door,rolling door rolling shutters,roll-up door,rolling shutter door,etc.

Consult QQ
This is the perimeter protection for the premises. The magnetic contact is usually installed in exterior opening doors and windows that are reachable from the ground (or from another part of a building which is accessible from the ground - such as a garage). 
The contacts operate on the principle that when the door or window moves more that 1/2" from the frame, the magnetic field on the switch is removed and this breaks the alarm circuit (or zone) which trips off the system. Once tripped, the alarm signal cannot be stopped by just closing the door or window. Magnetic contacts are popular and widely used because they detect an intruder before he enters the protected premises. A disadvantage is that the contact can be compromised if the intruder enters without opening the door or window, by breaking the glass.
Working Voltage: 12VDC;
Static Current(uA): 3
Size: 71*36*15mm
Applications: Scroll Steel Doors, Garage, etc.
Wired Garage Door Magnetic Contact Installation User Manual
EMI Standard :
EN55032:2015;
EN 61000-3-2:2014;
EN 61000-3-3:2013;
EMS Standard:
EN 55024:2010+A1:2015;
EN 1000-4-2:2009;
EN61000-4-3:2006+A1:2008+A2:2010;
EN61000-4-4:2012;
EN 61000-4-5:2014;
EN 61000-4-6:2014;
EN 61000-4-8:2010;
EN 61000-4-11:2004;
CE-LVD Standards:
IEC 60950-1:2005+A1:2009+A2:2013;
EN 60950-1:2006+A2:2013;
EN 62311:2008;
EMC:
ETSI EN 301 489-1 V2.2.0(2017-03);
ETSI EN 301 489-17 V3.2.0(2017-03);
ETSI EN 300 328 V2.1.1 (2016-11).
Door Windows Contact SDM-01*1