4G Industrial Routers

[Problem]: Using RTU5029S with IoT Card, The device is not online

Issued Time 2019 - 09 - 12Read 95Times

[Problem]: Using RTU5029S, the device is equipped with a normal mobile phone card, which can be connected to the cloud platform, replaced by an IoT card, and the device is not online.


(1) The device should be shut down when changing cards;

(2) Switch the device on and off again, wait 1-2 minutes, wait for the device to register to the signal;

(3) Take the IoT card and put it in the mobile phone to see if it can be used normally.