Other
By King Pigeon | 25 December 2020 | 0 Comments
[Question]:The trigger high and low value setting of cloud platform and Configuration software is th
[Question]:The trigger high and low value setting of cloud platform and Configuration software is the same or not ?
[Answer]: Not the same. The high and low limit settings in the configuration software are alarms issued by the device itself. To implement the high and low limit alarms of the device itself, the mobile phone card must be used in the device; if the device is equipped with an IoT card, the configuration software does not need to set the high and low limits. Directly on the platform to set the high and low limits through the trigger to achieve the alarm, the platform side can have SMS / phone / mail / WeChat and other alarms, more diversified than the device itself
[Question]:The trigger high and low value setting of cloud platform and Configuration software is the same or not ?
[Answer]: Not the same. The high and low limit settings in the configuration software are alarms issued by the device itself. To implement the high and low limit alarms of the device itself, the mobile phone card must be used in the device; if the device is equipped with an IoT card, the configuration software does not need to set the high and low limits. Directly on the platform to set the high and low limits through the trigger to achieve the alarm, the platform side can have SMS / phone / mail / WeChat and other alarms, more diversified than the device itself
[Answer]: Not the same. The high and low limit settings in the configuration software are alarms issued by the device itself. To implement the high and low limit alarms of the device itself, the mobile phone card must be used in the device; if the device is equipped with an IoT card, the configuration software does not need to set the high and low limits. Directly on the platform to set the high and low limits through the trigger to achieve the alarm, the platform side can have SMS / phone / mail / WeChat and other alarms, more diversified than the device itself
[Question]:The trigger high and low value setting of cloud platform and Configuration software is the same or not ?
[Answer]: Not the same. The high and low limit settings in the configuration software are alarms issued by the device itself. To implement the high and low limit alarms of the device itself, the mobile phone card must be used in the device; if the device is equipped with an IoT card, the configuration software does not need to set the high and low limits. Directly on the platform to set the high and low limits through the trigger to achieve the alarm, the platform side can have SMS / phone / mail / WeChat and other alarms, more diversified than the device itself
Leave a Reply
Your email address will not be published.Required fields are marked. *