The M130 Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, Integrated 1-2 Industrial 10/100M adaptive Ethernet module inside. It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.

The M130 Ethernet Remote I/O module provides a RS485 interface, through the RS485 bus, it can cascade Modbus RTU I/O devices or Modbus RTU meters, e.g.: a variety of digital input or digital outputs, analog inputs or outputs, thermal resistance IO module combination, save costs. At the same time, the Ethernet Remote I/O module has register mapping function, the cascade Modbus RTU I/O data are automatically collected to the mapping memory area, the Modbus TCP Client query without waiting then can get a quick response to meet the industrial timely requirements.
 
The M130 Ethernet Remote I/O module provides 8 optical-isolated digital inputs, supports max.700Khz high speed pulse counter, 4 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high sampling frequency and special filtering strategy to ensure it’s reliable.

1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;
2. Power supply 12~36VDC  with over voltage and phase-reversal protection;
3. Management and configuration via LAN connection configuration software for easy operation and maintenance;
4. Support Web realtime monitoring and Web debugging;  
5. DO1 support PWM output;
6. Integrated 10/100M adaptive Ethernet module, supports Modbus TCP protocol;
7. 8 optical isolated digital input, supports max. 700Khz high speed pulse counter;
8. 4 digital output or relay output, supports 10Hz~300KHz high speed pulse output;
9. High sampling frequency and special filtering strategy to ensure reliability;
10.1 RS485 Serial port, supports Modbus RTU Master or slave, can extend I/O modules;
11.Supports register mapping function and extend I/O inquiry strategy;
12.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;
13.LED instructions work status, with reset button to reset, easy on-site installation and commissioning;
14.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field.

M130T Specifications

 

Ethernet Remote I/O Module Specifications
• Digital Input
Sensor Type	Wet Contact (NPN or PNP), Dry Contact
I/O Mode	DI or Event Counter
Dry Contact	• On: short to GND=1 • Off: open=0
Wet Contact (DI to COM)	• On: 10 to 30 VDC =1 • Off: 0 to 3 VDC=0
Counter Frequency	Max. 700KHz(Only the 1st Channel can be used as high speed pulse counter)
Digital sampling frequency	500Hz
Digital filtering strategy	Continues 3 times
Isolation	Optical Isolated,3k VDC or 2k Vrms
• Digital Output
Type	Sink
I/O Mode	DO or Pulse Output
Pulse Output Frequency	10Hz~300KHz(Only the 1st Channel can be used as high speed pulse outputs)
Over-Voltage Protection	50 VDC
Over-Temperature Shutdown	175°C (typical), 150°C (min.)
Load Current	Max. 500 mA per channel
Digital sampling frequency	500Hz
• Working Power Requirements
Input Voltage	12~36VDC, Peak Voltage:+40VDC, Power consumption: Less than 3W;
Input Current	139 mA @ 24 VDC
• Power Output
Output Voltage	12~36VDC
Output Current	139 mA @ 24 VDC
• LAN
Ethernet	10/100 Mbps RJ45 ports
Protection	15KV ESD Protection
Protocols	Modbus TCP, TCP/IP,MQTT, TCP Server, TCP Client
Max. TCP Connection	5
• Serial Port
RS485	MODBUS- RTU Protocol, Modbus-ASCII Protocol
Protection	15KV ESD Protection
Modbus Slave address	1~255
Baud Rate	1200,2400,4800,9600,19200,38400,57600,115200,128000Bps;
Mapping registers	Bit Type: 300 Registers, 16-Bit Type: 300 Registers.
• Physical Characteristics
Wiring	I/O cable max. 14 AWG
Dimensions	105 x 88 x 30 mm
Weight	Under 205 g
Mounting	DIN rail or wall
• Environmental Limits
Operating Temperature	Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Altitude	Up to 3000 m

User Manual 

---

PC Configurator

---

 

Typically applications:

 

1.      BTS Monitoring;

2.      Security Alarm System applications;          

3.      Supervision and monitoring alarm systems;

4.      Automatic monitoring system;             

5.      Vending Machines security protection;

6.      Pumping Stations, Tanks, Oil or Water levels;

7.      Buildings and Real Estate;

8.      Weather Stations; 

9.      River Monitoring and Flood Control;

10.   Oil and gas pipelines;  

11.   Corrosion protection

12.   Temperatures, water leakage applications;

13.   Wellheads, boat, vehicle;

14.   Energy saving, street lights control system;

15.   Valve controls;

16.   Transformer stations;   

17.   Unmanned machine rooms;

18.   Control room application;

19.   Automation System, M2M;

20.   Access Control System;

21.  PLC Gateway, PLC Remote Monitoring.